专注福禄克测试仪销售与技术

热门关键词搜索: DSX-5000 DTX-1800 1T-1000 DSX-8000 MS2-100 查线仪 Aircheck G2 FTK1000 LRAT-2000

fluke-fx fluke-bz
123

福禄克FLUKE DSX-5000和DSX-8000实现百通的Belden 2183标准。

发布日期:2018年09月03日   浏览次数:3次   编辑:深圳连讯

Implementing limits on the Fluke Networks Versiv

Belden’s 4K UHD Media Cables, 2183P and 2183R, are specifically designed to deliver 4K content over HDBaseT up to 100 m, support HDBaseT 5Play and carry the UL 4299 Power Over HDBaseT (PoH) certification, all in a small, flexible design.

There are specific field testing limits for these cables designed by Belden and Fluke Networks. There are three limits that are available, Channel and Permanent Link that we are familiar with, and a third test limit named Direct Attach. The Direct Attach limit can be used when the installed link does not have any jacks and is just a plug to plug link, essentially a long patch cord. It is important to use this limit if you are working with field installed RJ-45 plugs.

In order to test the Direct Attach links, Belden recommends the use of their AX104552 couplers and attaching these directly to the end of the DSX-PLA004 permanent link adapters.

 

Permanent Link Adapter => AX104552 coupler => Rev Connect Plug

 

Regular Direct Attach links are tested with Patch Cord Adapters.

This document describes step-by-step instructions for selecting these test limits in the Fluke Versiv Tester.

You can configure Belden 2183 limits from Linkware Live, or from the tester. Instructions for setting up a project through Linkware Live are located here.

 

 

  1. Select Project
  2. New Project
  3. Name your Project
  4. Select Test Set Up or NEW TEST
  5. Select Cable Type
  6. More
  7. Manufacturers
  8. Belden

 

  1. Select your cable type, Riser or Plenum
  2. Test Limit
  3. More (this page shows the Last Used limits
  4. Vendor
  5. Selct your limit, Channel or Permanent Link or Direct Attach
  6. SAVE
  7. Back or HOME key
  8. Push TEST to start

 

 


更多



本文关键字: , , , ,
原创标题:福禄克FLUKE DSX-5000和DSX-8000实现百通的Belden 2183标准。
原文链接:http://www.faxytech.com/archives/dsx-belden-2183.html
版权说明:本文为深圳市连讯达电子技术开发有限公司(专业FLUKE福禄克测试仪代理)官网(www.faxytech.com)原创文章,版权所有。如果您需要转载,请注明出处并保留原文链接!如为转载文章会注明文章出处,转载文章不代表本公司观点。对于某些同行无耻恶意抄袭剽窃连讯客户案例的违法行为,连讯将追究法律责任!
详情请致电连讯公司:0755-83999818

福禄克FLuke DSX-5000线缆测试仪 福禄克FLuke DTX-1800线缆测试仪 福禄克FLuke Onetouch AT网络分析仪 福禄克FLuke OptiFiber PRO光纤测试仪
  • dtx系列测试仪新一代中文手持式测试仪 – 省时省力。
  • -9秒完成6A类认证测试
  • -铜缆、光纤测试一键切换
  • -出色的智能故障诊断能力
  • -具有1000MHz的测试带宽
  • -超越Cat 5e/6/6A/7类的规格要求
  • dtx系列测试仪新一代中文手持式测试仪 – 省时省力。
  • -9秒完成6类认证测试
  • -铜缆和光纤测试一键切换
  • -出色的智能故障诊断能力
  • -具有900MHz的测试带宽
  • -超越Cat 5e/6类的规格要求
  • dtx系列测试仪新一代手持式网络分析仪 – 省时省力。
  • -一键网络自动化测试
  • -支持自定义测试脚本设置
  • -出色的智能故障诊断能力
  • -具有数据捕获和性能测试
  • -全面支持国标GB/T21671
  • dtx系列测试仪新一代快速OTDR测试仪 – 省时省力。
  • -首创智能手机界面的 OTDR
  • -业界最短事件和衰减死区
  • -支持自定义项目文件夹
  • -支持数据中心测试模式
  • -强大事件和曲线分析能力